4 year warranty
ProductPage_ViO35-6A_Hero-Component_Slider-Image-2
BuildPricePages_ViO35-6A_ProductImage
ViO35_red-4
ProductPage_ViO35-6A_Hero-Component_Slider-Image-5

Mini Excavator ViO35-6A

Do-it-all performance

Step up to our 3.5-ton class mini excavator and you’ll find the perfect balance of power, capability, comfort, and efficiency to work all-day and increase your bottom line. With a true zero tail swing design ready to work in tight environments, you can add even more capability with available auto-shifting 2-speed travel to quickly move between work areas; blade float functionality for back blading and leveling; and 4-way blade control. And with Tier 4 Final power under the cowl, you’ll not only appreciate our legendary and incredibly quiet work-tough performance, but greater operational efficiency as well. With standard ECO mode and Auto Deceleration, you’ll enjoy up to 20% less fuel consumption than previous models.

Weight 8,214 lbs 3.72 t
Horsepower 24.4 HP 18.2 kW
Max Dig Depth 11’3″ 3,429 mm
ProductPage_ViO35-6A_Hero-Component_Slider-Image-2
BuildPricePages_ViO35-6A_ProductImage
ViO35_red-4
ProductPage_ViO35-6A_Hero-Component_Slider-Image-5
ViO35_red-14

Service at your fingertips

The intelligent design of a Yanmar mini excavator is not only built to work harder, but to also make it easier and quicker to perform routine service. Virtually every major component including the engine, hydraulic system, starter, alternator, and battery are a simple access panel away.

ProductPage_ViO35-6A_Full-Page-Image

Specifications

Engine

This div for css purpose only
Model
3TNV88F-ESBV
3TNV88F-ESBV
This div for css purpose only
Rated Output
24.4 HP / 2,200 rpm
18.2 kW / 2,200 rpm
This div for css purpose only
Type
Water-cooled 4-cycle diesel

Operating Weight

Rubber Track (Canopy)
7,905 lbs
3.58 t
Steel Track (Canopy)
8,124 lbs
3.72 t
Rubber Track (Cabin)
8,214 lbs
3.68 t
Steel Track (Cabin)
8,434 lbs
3.83 t

Performance

Max Digging Force, Bucket / Arm
5,643 / 4,266 lbs
32.1* / 20.4* kN (*without quick coupler)
Traveling Speed, High / Low
2.7 / 1.6 MPH
4.5 / 2.7 km/h
Swing Speed
9.5 RPM
9.5 RPM
Boom Swing Angle, (L / R)
43 / 65
43 / 65

Ground Contact Pressure (Rubber Track)

Canopy
4.80 PSI
33.1 kPa
Cabin
4.97 PSI
34.3 kPa

Hydraulic System

Pump Capacity
9.8 GPM x 2 {Variable displacement pump} 6.9 GPM x 1, 2.9 GPM x 1 {Gear pump}
37.0 (L/min) x 2 {Variable displacement pump} 26.2 (L/min) x 10.8 (L/min) x 1 {Gear pump}
Main Relief Set Pressure
3,205 x 2, 3,133 x 1 PSI
22.1 x 2, 21.6 x 1 MPa

Blade Dimensions

Width
5′ 8″
1,740 mm
Stroke, Raise / Lower from G.L.
1′ 5″ / 1′ 3″
425 mm / 370 mm

Fuel Tank

This div for css purpose only
Capacity
10.8 Gals
41 L
View Specs & Dimensions Brochure